AT-501 The Lowest Power SOM for Linux Apps

AT-501 SOM

Product Overview
The AT-501 is an industrial embedded System-On-Module (SoM) based on Atmel's new SAMA5D3 CortexTM -A5 system on chip. It offers the optimal balance of the most power efficient Cortex A to date with a high performance CPU running at 536 MHz and a floating point unit. It is designed as a ready to use embedded control and processing module for applications such as medical and industrial devices and due to its low power consumption is especially suited for battery powered appliances.   get-quote

Main Benefits
Ready to use control, HMI and processing module
Low power consumption
Perfect solution for IOT gateway & data concentrator applications

Based on Atmel SAMA5D3 processor
Supporting SAMA5 D31, D34, D35 and  D36

Cortex A5 @ 536MHZ
Floating Point Unit VFPv.4
32-KB instruction and 32-KB data L1 caches

32bits wide @ 166Mhz, 256 MB DDR2 , expendable to 512MB
NAND Flash  of 256 MB expendable up to 1GB
Optional 4GB eMMC

10/100/1000 Ethernet with IEEE1588 support
Optional additional 10/100 port
Up to 4 USART ports (TX, Rx, CTS, RTS)
Up to 2 UART (Tx, RX)
3 USB V2.0 interfaces (2 Host, 1 Host/Device)
Up to 3 I2C interfaces
Up to 2 SPI interface (4 CS)
Up to 120 GPIO 3.3V
Up to 12 ADC lines
Up to 3 HS SD Card/SDIO/MMC interfaces
Up to 2 CAN interfaces

LCD controller
RGB, Up to 24 bit per Pixel, 1280×720 pixels
Touch screen 4 or 5 wires resistive

Single input power 3.3V
0.5W in typical run mode@536MHz

200 pin SO-DIMM connector
Dimensions: 68 x 47mm (2.7 x 1.85 inch)

OS Support
Linux  Kernel ver.- 3.10 Debian ver. 7
Linux OS by Timesys® Corporation,
Android OS by Linux4Biz
Windows Embedded Compact 7 and 2013